)]}' { "log": [ { "commit": "8481f7506b4c67de54fa96b5510007dc2c66a348", "tree": "591d0e285c1d36aeb813b75c0f8d76e62b688a2d", "parents": [ "a380d67c4f648aaf576adba0ea22d40d3782bf44" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Tue Jun 27 00:51:28 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Tue Jun 27 10:07:32 2023 +0000" }, "message": "m/n/c/network: fix SNAT\n\nThe previous change to this broke clusternet as it tried to masquerade\ntraffic destined to that interface, but that is an unnumbered interface,\ncausing the masquerade to fail and all inter-node traffic to be\nrejected. Fix this by including the clusternet interface in the list of\ninterfaces not to NAT for.\n\nChange-Id: I4a79a1978b1aa449fca1dd2d0a2b0a5decc63ea8\nReviewed-on: https://review.monogon.dev/c/monogon/+/1857\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "a380d67c4f648aaf576adba0ea22d40d3782bf44", "tree": "eead98807b56e6ab66eca83102119c5a5477209c", "parents": [ "7053598586ab00378938c245b7ad748f671a991d" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Mon Jun 26 13:17:42 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Mon Jun 26 13:48:52 2023 +0000" }, "message": "m/n/core/rpc/resolver: log current processor state on watcher error\n\nWe seem to be having some resolvers getting stuck in production like so:\n\nI0626 09:52:39.708844 resolver.go:275] CURUPDATE: error in loop: when receiving node: rpc error: code \u003d Unimplemented desc \u003d unknown service metropolis.node.core.curator.proto.api.Curator\nI0626 09:52:39.708850 resolver.go:276] CURUPDATE: retrying in 10.040771699s...\n\nThis introduces extra logging that should help us figure out what\nexactly broke, or at least bring us a bit closer to figuring it out.\n\nChange-Id: I658cff6ae86e9124141b5d2c36dceafa377842e9\nReviewed-on: https://review.monogon.dev/c/monogon/+/1852\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "7053598586ab00378938c245b7ad748f671a991d", "tree": "fd52caf5360282ca315e98e407a4d42f906a2800", "parents": [ "60d6b902d66a4c5c0a2a926c85936935106b9180" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Thu Jun 22 19:37:38 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Mon Jun 26 11:44:11 2023 +0000" }, "message": "m/n/c/rpc/resolver: dampen curator updates\n\nThis makes the resolver only process node updates if some curator data\nwas actually changed.\n\nFixes https://github.com/monogon-dev/monogon/issues/233\n\nChange-Id: I790adfc4aa3562864faf807d32ac00d9e3bd0bea\nReviewed-on: https://review.monogon.dev/c/monogon/+/1851\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "60d6b902d66a4c5c0a2a926c85936935106b9180", "tree": "d0d690bb830ebd611318626110db510015b5ce58", "parents": [ "62a1edd234557c46facfd23661ff08c37c8e911f" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Tue Jun 20 16:02:40 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Mon Jun 26 11:34:08 2023 +0000" }, "message": "m/p/gpt: switch to msguid\n\nReplaces the old UUID mangling code with the newly-introduced msguid.\n\nChange-Id: I667e41c28959b4b95265c1ffdcf7f5bfcad4083d\nReviewed-on: https://review.monogon.dev/c/monogon/+/1850\nTested-by: Jenkins CI\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\n" }, { "commit": "62a1edd234557c46facfd23661ff08c37c8e911f", "tree": "7555b7996b1761d6eef4777a2ea482520b2c1db2", "parents": [ "b390d715897e29064102257f4837959e694f9bf9" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Tue Jun 20 16:01:44 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Mon Jun 26 11:34:03 2023 +0000" }, "message": "m/p/msguid: init\n\nAdds a new msguid package which contains functions for encoding and\ndecoding Microsoft\u0027s mixed-endian GUID/UUID format. This format is\nused by Microsoft as well as a bunch of UEFI-related standards.\n\nChange-Id: Icca8ef7ad7f7359808ea7f19e3824639f7b1e2eb\nReviewed-on: https://review.monogon.dev/c/monogon/+/1849\nTested-by: Jenkins CI\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\n" }, { "commit": "b390d715897e29064102257f4837959e694f9bf9", "tree": "4d705eb9b84b87f3be6c3da31d24bf959da1f768", "parents": [ "3546615448c39dff683bb1723344ed283b279d46" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed Jun 21 21:47:59 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Mon Jun 26 09:32:41 2023 +0000" }, "message": "m/n/c/curator: clean up stale leader election after reboot\n\nThis is useful if we reboot a leader and it comes back while its\u0027 old\nstale leader election key/value is present.\n\nWithout this, other nodes would continue to connect to the newly\nrebooted leader even though it is not a leader anymore, confusing\nthemselves and cluster operators in the process.\n\nChange-Id: I306e7040550084ef39ab20c3c289a3137145a2d9\nReviewed-on: https://review.monogon.dev/c/monogon/+/1845\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "3546615448c39dff683bb1723344ed283b279d46", "tree": "ed3285dfa7a0adcc76f64766707a28e24d0373e4", "parents": [ "2f7e0a281e72ae45fff6c4d79934442367475b81" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Wed Jun 14 20:01:11 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Thu Jun 22 17:12:03 2023 +0000" }, "message": "m/n/core/localstorage/crypt: read partition data from uevent\n\nPreviously we only checked the blockdevices itself,\nbut in the real-world the minor-id is not always the partition offset.\nThis scans all blockdevs that are partitions and creates them correctly\n\nChange-Id: I8f3d99761e9e883783b398496ec8b35f28f3557d\nReviewed-on: https://review.monogon.dev/c/monogon/+/1813\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "2f7e0a281e72ae45fff6c4d79934442367475b81", "tree": "4dcd2233a274bef4645c4bfbbbd62f072d11481a", "parents": [ "c49b207a66a994ccda382d685022d08cbd9ee582" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Thu Jun 22 16:56:13 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Thu Jun 22 16:36:33 2023 +0000" }, "message": "m/node: enlarge K8s networks\n\nFor bigger clusters, the current 10.0.0.0/16 subnet is far too small.\nSwitch to 10.192.0.0/11 which should be out of the way of most of our\ntest infra and is large enough for 8192 nodes with 253 pods which is\nbig enough for the time being. Also migrate the service network\nto 10.224.0.0/16 and make it much bigger. It does not need to be in the\npod CIDR, so move it out of there.\nBut for large clusters this will continue to be a problem until we have\na better allocation algorithm or switch to IPv6 with 464xlat (which\nis not supported on Linux currently however).\n\nChange-Id: Ib3a019fffacec2172721f04c01133b44bffba73b\nReviewed-on: https://review.monogon.dev/c/monogon/+/1848\nReviewed-by: Leopold Schabel \u003cleo@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "c49b207a66a994ccda382d685022d08cbd9ee582", "tree": "b0eed5a22bdb110ea4c115a2bea403e1e00e5dc2", "parents": [ "51a3ed59a1408fe5d8103dca5b6a04dbaa4e5b6a" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed Jun 21 23:12:01 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Thu Jun 22 12:38:25 2023 +0000" }, "message": "m/n/core/net/hostsfile: do not stomp over cluster directory\n\nIf we join a cluster after reboot, we already have a cluster directory\non the ESP. We should not write over it with an empty one, but instead\nwait until we\u0027ve received a recent copy of it from the cluster.\n\nFixes https://github.com/monogon-dev/monogon/issues/228\n\nChange-Id: Ibbfa23009eaa9feb99a332ac0c5e17dd89aea7bf\nReviewed-on: https://review.monogon.dev/c/monogon/+/1846\nTested-by: Jenkins CI\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\n" }, { "commit": "51a3ed59a1408fe5d8103dca5b6a04dbaa4e5b6a", "tree": "b17dd748b088b4c7899c4aee0a1ab862a59509b4", "parents": [ "186109c55db3121749311fc2e954be0eaccdf249" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Wed Jun 21 16:45:15 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Thu Jun 22 12:33:31 2023 +0000" }, "message": "m/n/k/containerd: change default runtime to runc\n\nFor high-security usecases it might still make sense to force gVisor,\nbut generally people expect runc as the default runtime. gVisor can\nstill be used by specifying a runtimeclass in the pod.\n\nChange-Id: Idc02275fd00c2a7dff3ce6949268294afa5644eb\nReviewed-on: https://review.monogon.dev/c/monogon/+/1839\nTested-by: Jenkins CI\nReviewed-by: Leopold Schabel \u003cleo@monogon.tech\u003e\n" }, { "commit": "186109c55db3121749311fc2e954be0eaccdf249", "tree": "d65cd1416c480bf517bede017f5688ad4352e0ab", "parents": [ "d2fc01fb49e7f1decb534a9ae8da7ba8814406d9" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed Jun 21 16:57:36 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed Jun 21 21:52:37 2023 +0000" }, "message": "m/n/core/roleserve: persist node roles across reboots\n\nThis allows us nodes to attempt to bring up some services before they\nget fully connectivity to the cluster.\n\nThis is especially useful if a node cannot establish connectivity to the\ncluster, eg. because it\u0027s the only control plane node that just started\nup.\n\nFixes https://github.com/monogon-dev/monogon/issues/226\n\nChange-Id: I030ccc02851e74ceb8dc043203083aa5b6854b55\nReviewed-on: https://review.monogon.dev/c/monogon/+/1842\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "d2fc01fb49e7f1decb534a9ae8da7ba8814406d9", "tree": "3b4991d6c8cd45e40066dbc1ebe9c66b508d10ce", "parents": [ "6a09bd5dbf49c438dc9c5743c8724ddc6efbe505" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed Jun 21 16:49:23 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed Jun 21 21:52:37 2023 +0000" }, "message": "m/n/core/n/hostsfile: only persist control plane nodes in ClusterDirectory\n\nThis fixes some ugly startup issues where a node attempts to communicate\nvia control plane protocols to nodes that have no chance of running the\ncontrol plane.\n\nIn general, the Cluster Directory predates the split between control\nplane and worker nodes, and its definition should likely be formally\nupdated to only contain control plane nodes.\n\nChange-Id: Ie290829a010aef0c3a587326e864fe93bf991220\nReviewed-on: https://review.monogon.dev/c/monogon/+/1840\nTested-by: Jenkins CI\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\n" }, { "commit": "6a09bd5dbf49c438dc9c5743c8724ddc6efbe505", "tree": "d4829766a1844f761187c70a44b5101363d8637c", "parents": [ "eca5af965b6d95d953066a298ee896791ee00796" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Wed Jun 21 17:40:32 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Wed Jun 21 16:04:12 2023 +0000" }, "message": "m/n/c/network: make SNAT generic\n\nThis changes the SNAT/Masquerade rule from being a thing set up per\ninterface which was only implemented by the dynamic network runnable to\na generic rule set up by the general network service part shared between\nthe static and dynamic implementations. It also tries to avoid NATing\nhost-originated traffic. Matching on interface names is argubly ugly but\nthe alternative is patching CNI plugins, which is also ugly.\n\nChange-Id: I7ec40fc244ae4689b6f96ab87dbebe9a6c43dd70\nReviewed-on: https://review.monogon.dev/c/monogon/+/1844\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "eca5af965b6d95d953066a298ee896791ee00796", "tree": "095d92aeddcd7861b4c204bc2a9abb5db24977cb", "parents": [ "2876efab007ae58856891dbe5cb3e985d948c6d9" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Jun 20 13:31:37 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed Jun 21 15:01:58 2023 +0000" }, "message": ".bazelrc: add go tags: {net,osuser}go\n\nThis makes our code not use glibc-based implementations of user and host\nresolution even when cgo is enabled for race detection.\n\nChange-Id: I162105ef58291dc225fb158b56c93cfb7bce9a54\nReviewed-on: https://review.monogon.dev/c/monogon/+/1834\nTested-by: Jenkins CI\nReviewed-by: Leopold Schabel \u003cleo@monogon.tech\u003e\n" }, { "commit": "2876efab007ae58856891dbe5cb3e985d948c6d9", "tree": "25d2194ef0afd0337d12725dc5848ad870923a22", "parents": [ "83b2a3612d375d60f97500352c1f8a2197c99645" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Jun 20 14:30:40 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed Jun 21 15:01:51 2023 +0000" }, "message": "third_party/go: disable btrfs in containerd\n\nThis makes sure that if we build with cgo enabled (for race testing) we\nstill don\u0027t attempt to build btrfs.\n\nChange-Id: Ic608188ad1dc0b21c9f1822afa2b455bfd56959f\nReviewed-on: https://review.monogon.dev/c/monogon/+/1830\nReviewed-by: Leopold Schabel \u003cleo@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "83b2a3612d375d60f97500352c1f8a2197c99645", "tree": "aba96d8a6503d92983f365dd27fa7e81f511c53c", "parents": [ "9fd3c3de3d48f328c5771f3659235774aa7df984" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Wed Jun 14 22:15:25 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Tue Jun 20 16:36:17 2023 +0000" }, "message": "m/n/core/cluster: dont print cluster directory\n\nIf a cluster has hundreds of nodes, the bootup will print all of them.\nWhen you have a particularly slow serial connection,\nit can hide crash reports and other more important messages.\n\nChange-Id: I50b75795ec3ebadefe364bf94c3b907c257ffa71\nReviewed-on: https://review.monogon.dev/c/monogon/+/1821\nReviewed-by: Leopold Schabel \u003cleo@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "9fd3c3de3d48f328c5771f3659235774aa7df984", "tree": "ed1c39faa59c9bfd6a3bdd6a2bdfe6814c73e2f6", "parents": [ "9739a4f0d1a48cbc4e9f6092d3bd471e833bb8c0" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Jun 20 13:18:36 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Jun 20 14:19:54 2023 +0000" }, "message": "build/toolchain/musl-host-gcc: handle non-workspace-root execution\n\nThis is needed to build stdlib with cgo, which is in turn required for\nthe race checker to be enabled.\n\nChange-Id: Ic81542925a02c626f157dfd8c6650de3dbb30c7d\nReviewed-on: https://review.monogon.dev/c/monogon/+/1832\nTested-by: Jenkins CI\nReviewed-by: Leopold Schabel \u003cleo@monogon.tech\u003e\n" }, { "commit": "9739a4f0d1a48cbc4e9f6092d3bd471e833bb8c0", "tree": "a0d1048b3a37d0050b0ff5aba250435c039d29be", "parents": [ "30021af6eaf9f2963d83314c283ebdd23fff2674" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Jun 20 13:40:21 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Jun 20 14:19:47 2023 +0000" }, "message": "build: add cgo to nogo exceptions\n\nSeems like cgo is placing some files in a separate directory in the\nworkspace root.\n\nChange-Id: Icd94dec7281350339f0b1dd88d61556d75982d64\nReviewed-on: https://review.monogon.dev/c/monogon/+/1836\nTested-by: Jenkins CI\nReviewed-by: Leopold Schabel \u003cleo@monogon.tech\u003e\n" }, { "commit": "30021af6eaf9f2963d83314c283ebdd23fff2674", "tree": "b8be79d10a869ebb1e2aac4a5a89ce187206bb60", "parents": [ "ea6353fd49b3978cfef7f99ada99a99f8bc10715" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Jun 20 13:30:11 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Jun 20 14:19:43 2023 +0000" }, "message": "metropolis/node/build: allow impure code in root if race checking is enabled\n\nThis allows us to build the root filesystem with race detection enabled.\n\nChange-Id: I370ce2114090f828f0d9843fd4a7dc87c47bd153\nReviewed-on: https://review.monogon.dev/c/monogon/+/1835\nReviewed-by: Leopold Schabel \u003cleo@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "ea6353fd49b3978cfef7f99ada99a99f8bc10715", "tree": "b854dec6f99a7555abc32b1ca27b74b2af815294", "parents": [ "98a6cccb052c5d17f4f2429edf41d57bd74b7ffd" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Jun 20 13:08:55 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Jun 20 14:18:34 2023 +0000" }, "message": "metropolis/clusternet: fix race condition\n\nThis gives the wireguard backend a copy of the peer data instead of a\npointer into mutable memory.\n\nChange-Id: I47ee83f3d484cc809c35d2e1779b519ec60c7c78\nReviewed-on: https://review.monogon.dev/c/monogon/+/1825\nTested-by: Jenkins CI\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\n" }, { "commit": "98a6cccb052c5d17f4f2429edf41d57bd74b7ffd", "tree": "da656463788abd785a884743e5c5f75e0da7f7c7", "parents": [ "c1ce95f7e86c74a76ae2b29986905cb34cb19e56" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Jun 20 13:09:12 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Jun 20 14:18:27 2023 +0000" }, "message": "metropolis/consensus: fix race condition\n\nThis returns a copy of each status, instead of the same status, possibly\nmutated.\n\nChange-Id: Ic4ed425a38b001b0139a81c46c61af551b966166\nReviewed-on: https://review.monogon.dev/c/monogon/+/1826\nTested-by: Jenkins CI\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\n" }, { "commit": "c1ce95f7e86c74a76ae2b29986905cb34cb19e56", "tree": "aef29ffa1227fe5e8e07b610838489290be2c7a5", "parents": [ "2e9898d28213ec4e3fc48d962c2e2afbc0c6595c" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Jun 20 13:09:25 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Jun 20 14:18:21 2023 +0000" }, "message": "metropolis/rpc: fix race condition\n\nThis hands off a copy of the curator map across a channel instead of the\nmutable map itself.\n\nChange-Id: Ib7f4ed795648517ae19938c52a6cb193f293ac8b\nReviewed-on: https://review.monogon.dev/c/monogon/+/1827\nTested-by: Jenkins CI\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\n" }, { "commit": "2e9898d28213ec4e3fc48d962c2e2afbc0c6595c", "tree": "e0c778089bb8a3c67d24dd2db3cbbd302ce823b6", "parents": [ "5b13d8112a63282d12690ce05dbfa245f910d5a9" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Jun 20 13:09:41 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Jun 20 14:18:11 2023 +0000" }, "message": "metropolis/curator: fix race condition in tests\n\ngrpclog cannot be accessed concurrently with gRPC requests possibly\nalready running. Let\u0027s just remove this integration in tests.\n\nChange-Id: I074c583baf3a7f87e76e7dde6080e3efdb19d5c8\nReviewed-on: https://review.monogon.dev/c/monogon/+/1828\nTested-by: Jenkins CI\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\n" }, { "commit": "5b13d8112a63282d12690ce05dbfa245f910d5a9", "tree": "f69de58cf76b274e4c83f2472d08b578afb64fdc", "parents": [ "d20af4f15347651efa7b90490f8e657d35281883" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Jun 20 13:22:23 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Jun 20 14:18:03 2023 +0000" }, "message": "third_party/linux: ignore more configuration settings\n\nChange-Id: Id1117d86d742a94f762f186e6c1f9193dc4e0597\nReviewed-on: https://review.monogon.dev/c/monogon/+/1829\nTested-by: Jenkins CI\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\n" }, { "commit": "d20af4f15347651efa7b90490f8e657d35281883", "tree": "49f01ce9ba6d73e06cf7ff3b7184c5db1d9c7b25", "parents": [ "e1a4ac5eaec848a8b1d883c3963cfe399c71cb7d" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Jun 20 13:08:24 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Jun 20 13:06:46 2023 +0000" }, "message": "metropolis/pkg/cmd: fix race condition\n\ncmd.Wait should not be accessed concurrently.\n\nChange-Id: Icaaa1a22b1d23211dc1259af6cf97463228944ae\nReviewed-on: https://review.monogon.dev/c/monogon/+/1824\nTested-by: Jenkins CI\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\n" }, { "commit": "e1a4ac5eaec848a8b1d883c3963cfe399c71cb7d", "tree": "ef289013336335c69407d780bbccb614fb258282", "parents": [ "7e1c489409345f7212efdfcdfb105a5bbfd365c2" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Tue Jun 20 12:17:54 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Tue Jun 20 12:33:09 2023 +0000" }, "message": "cloud/agent: generate hwreport only if a first heartbeat was successful\n\nThis is mostly a hack but as we dont have a way (yet) to know when all devices\nare registered, we just wait until the first heartbeat was sent and only after\nthat sent a hwreport. This should at least make sure that all important network\ninterfaces are registered.\n\nChange-Id: Icdfc43c212470dcc37a2f916524b5f29ee42ae42\nReviewed-on: https://review.monogon.dev/c/monogon/+/1823\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "7e1c489409345f7212efdfcdfb105a5bbfd365c2", "tree": "be82408747ad02bdd08c6e3b5f0cacfa56d154ca", "parents": [ "54e212a9914ad8003fc4e353f96651340d287c2d" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Tue Jun 20 12:07:02 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Tue Jun 20 12:27:20 2023 +0000" }, "message": "c/shepherd/equinix/wrapngo: correct metric endpoint matcher\n\nAs stated in the error message its projects instead of project\n\nChange-Id: I4bee1fd7821d80280b314b8beaecfd88e48d81fd\nReviewed-on: https://review.monogon.dev/c/monogon/+/1822\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "54e212a9914ad8003fc4e353f96651340d287c2d", "tree": "df3b1624d9679e30aefac9b98b2f9b91523eca0b", "parents": [ "d34299ebe13211802739d698e526be78161eac6f" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed Jun 14 13:45:11 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Jun 20 11:37:55 2023 +0000" }, "message": "metropolis: implement Metrics Service\n\nThis is the first pass at a Metrics Service. It currently consists of an\nHTTP reverse proxy which authenticates incoming connections using the\nCluster CA and certificates, and passes these connections over to a\nlocally running node_exporter.\n\nIn the future more exporters will be added, and we will likely also run\nour own exporter for Metropolis-specific metrics.\n\nChange-Id: Ibab52aa303965dd7d975f5035f411d1c56ad73e6\nReviewed-on: https://review.monogon.dev/c/monogon/+/1816\nTested-by: Jenkins CI\nReviewed-by: Leopold Schabel \u003cleo@monogon.tech\u003e\n" }, { "commit": "d34299ebe13211802739d698e526be78161eac6f", "tree": "2016915e8cb17311904638c13f934b2150b25aa4", "parents": [ "89974c6f9e4f81d6d819d041a7f5286772df7124" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Thu Jun 15 11:07:47 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Thu Jun 15 11:47:12 2023 +0000" }, "message": "m/n/core/network/hostsfile: fix nodeMap data race\n\nChange-Id: I7c052691712ebd39e2a23a9497d4d6d0c0ab1e0c\nReviewed-on: https://review.monogon.dev/c/monogon/+/1817\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "89974c6f9e4f81d6d819d041a7f5286772df7124", "tree": "db0e768e42262a04ddb11fa3c1a85420e54b4796", "parents": [ "6d563cac226b327d41d95bf0219b3ff972ab6952" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Wed Jun 14 22:15:10 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Thu Jun 15 10:02:31 2023 +0000" }, "message": "m/n/c/cluster: set StorageSecurity in bootstrap path\n\nCurrently this is only set properly in the register path, causing the\nconfiguration of the bootstrap node to be inconsistent. This causes\nbootup to fail with `Node startup failed: sealed configuration has\ninvalid node unlock key (wanted 32 bytes, got 0)`.\nFix this by also persisting the chosen storage security option in the\nnode configuration when bootstrapping.\n\nChange-Id: I93bf75d412c9aa7c09b5a739ce65b6873d947fd5\nReviewed-on: https://review.monogon.dev/c/monogon/+/1815\nTested-by: Jenkins CI\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\n" }, { "commit": "6d563cac226b327d41d95bf0219b3ff972ab6952", "tree": "02c80c9ad94b0302ffed71fb3b4763104574c394", "parents": [ "634a3cf16ecf4cd551847185e7b539d16ad52d2d" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed Jun 14 13:44:20 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Thu Jun 15 09:31:47 2023 +0000" }, "message": "third_party/go: pull in node_exporter, add to metropolis rootfs\n\nChange-Id: I5efe5257e7740bf1721f3dd6f130a3c618e33381\nReviewed-on: https://review.monogon.dev/c/monogon/+/1806\nReviewed-by: Leopold Schabel \u003cleo@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "634a3cf16ecf4cd551847185e7b539d16ad52d2d", "tree": "7653202205bd238b3d9d02c2bf87ae66e277d933", "parents": [ "b37d7d8ef4e318c9d35d34eff79fa0a304ff35aa" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Wed Jun 14 20:01:33 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Wed Jun 14 19:19:16 2023 +0000" }, "message": "metropolis/cli/metroctl: dont segfault on missing status\n\nChange-Id: Ib1a594e0ccca0f6a993e651b62e8adcfb9dc1ea4\nReviewed-on: https://review.monogon.dev/c/monogon/+/1814\nTested-by: Jenkins CI\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\n" }, { "commit": "b37d7d8ef4e318c9d35d34eff79fa0a304ff35aa", "tree": "d9426085481415352c83263204c81e2796032eed", "parents": [ "c09327c6393202f0b425313a18a834954aeba572" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Wed Jun 14 19:06:44 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Wed Jun 14 18:18:30 2023 +0000" }, "message": "metropolis/cli/metroctl: dont write hostPort and report correct context\n\nChange-Id: I9ddccf35cf7a1fe7ee839250ceab0925fe8f0138\nReviewed-on: https://review.monogon.dev/c/monogon/+/1811\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "c09327c6393202f0b425313a18a834954aeba572", "tree": "80eebf9133ee9126295b1f3aa1a80578854b830a", "parents": [ "1600d9b3aa84c3259a3e8355cba7702825924b6d" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Wed Jun 14 17:48:56 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Wed Jun 14 18:18:30 2023 +0000" }, "message": "metropolis/cli/metroctl: set storage security policy inside installer\n\nWithout it the installed metropolis node will fail initialization\n\nChange-Id: I137107260fc7c4f50052791f58454dd07b98c29c\nReviewed-on: https://review.monogon.dev/c/monogon/+/1809\nTested-by: Jenkins CI\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\n" }, { "commit": "1600d9b3aa84c3259a3e8355cba7702825924b6d", "tree": "89699bcfedda33bb6aa7a69a4a9b11d58e6009c6", "parents": [ "98054a1ddb45d9e0246a0f7f7b93f9e90619a544" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Wed Jun 14 20:00:59 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Wed Jun 14 18:16:09 2023 +0000" }, "message": "m/c/metroctl: add newline between unapproved nodes\n\nChange-Id: I1db00eb9396e597a4596ad2b491a75bbcebacd62\nReviewed-on: https://review.monogon.dev/c/monogon/+/1812\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "98054a1ddb45d9e0246a0f7f7b93f9e90619a544", "tree": "52ce0573faf5cddbb60c7ed99463837ba14426c8", "parents": [ "0c2f9ded884f7f54d74a8c251c51231841f71728" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed Jun 14 18:16:21 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Wed Jun 14 17:07:27 2023 +0000" }, "message": "metropolis/node: fix non-secure TPM/storage policy codepaths\n\nThis fixes enoug things to pass manually ran E2E tests with the initial\ncluster confiugration changed to a number of possible combinations\n(with/without TPM, with authenticated/encrypted/insecure storage).\n\nThese should, of course, be automatically tested. However, that is\npending on the extension of E2E test system that will let it run\nlong-term tests against real clusters. Otherwise we\u0027d just waste tons of\ntime running the entire matrix of possible combinations on every CR.\n\nChange-Id: I71a56f9a31c738ee2b2d4dfa10d2a58fd5cb0554\nReviewed-on: https://review.monogon.dev/c/monogon/+/1810\nTested-by: Jenkins CI\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\n" }, { "commit": "0c2f9ded884f7f54d74a8c251c51231841f71728", "tree": "9a084723cea0b9cc183b694386aa0e322b5d465f", "parents": [ "b7ff592e4f08022df5d980a03a396f4ff5330b29" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Wed Jun 14 15:19:27 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Wed Jun 14 15:41:41 2023 +0000" }, "message": "m/n/c/network: improve restartability\n\nDeletes all newly-added interfaces as well as sets all reconfigured\ninterfaces to down if an error occurs in an effort to improve\nrestartability.\n\nChange-Id: I715514c7f6b7a6f45a1c66333fd540556be2b29b\nReviewed-on: https://review.monogon.dev/c/monogon/+/1808\nTested-by: Jenkins CI\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\n" }, { "commit": "b7ff592e4f08022df5d980a03a396f4ff5330b29", "tree": "fb6173e39e0423c47f897939277ae68bd218e346", "parents": [ "e59e6e1ec670e6315fb8ce7fefd7a8551aec75db" ], "author": { "name": "Leopold Schabel", "email": "leo@monogon.tech", "time": "Wed Jun 14 11:57:41 2023 +0200" }, "committer": { "name": "Leopold Schabel", "email": "leo@monogon.tech", "time": "Wed Jun 14 11:18:26 2023 +0000" }, "message": "intellij: update aspect path\n\nUpstream change:\nhttps://github.com/bazelbuild/intellij/commit/d1a5ccc3d4d971224faafc6684e0216855e59d47\n\nChange-Id: I287fae1dcff38164eaea3aeaecf768247b8302c5\nReviewed-on: https://review.monogon.dev/c/monogon/+/1805\nTested-by: Jenkins CI\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\n" }, { "commit": "e59e6e1ec670e6315fb8ce7fefd7a8551aec75db", "tree": "bc642135ff1f2911e55942c2f1246c94d2a97370", "parents": [ "6c45434189e387b234109b68b1ed5a8f2cd5b439" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Jun 13 16:11:43 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Tue Jun 13 18:52:29 2023 +0000" }, "message": "cloud/bmaas: first round of indexes\n\nThese are based on inspecting the production database, and should be\nenough to get us out of the woods wrt. BMDB performance.\n\nChange-Id: Ice285f25bc1d2825a04750fc6d62ef0925b9d643\nReviewed-on: https://review.monogon.dev/c/monogon/+/1804\nTested-by: Jenkins CI\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\n" }, { "commit": "6c45434189e387b234109b68b1ed5a8f2cd5b439", "tree": "4cff8bb2fac00df28699559256ce7649b38877e1", "parents": [ "46bf7d6c6437dfbf9dcc1e1d7d80fcc1c601f9b5" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Thu Jun 01 12:23:38 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Tue Jun 13 13:44:46 2023 +0000" }, "message": "m/node: build Linux with modules\n\nThis introduces modules into our Linux build. I originally didn\u0027t want\nto do this, this is why this wasn\u0027t done until now. But various things\nin the kernel weren\u0027t set up for this, for example the AMD and Intel KVM\nmodules cannot both be loaded, only the first one loaded works. Also,\nthe Linux kernel cannot load firmware for built-in modules reliably as\nthe filesystem it tries to load it from is not always mounted first,\neven if the kernel itself mounts it.\n\nThe firmware issue was brought up multiple times on LKML, but Linus is\nof the opinion that the firmware should be next to the kernel module,\nthus either built-in (not viable for licensing and size reasons) or the\nmodules need to be loadable and on the same filesystem as the firmware.\n\nThus unless we want to carry signifcant patches against the Kernel in a\ndeadlock-prone area, we are forced to adopt a design with loadable\nmodules (or ship everything twice in an initramfs which is also not\ndesirable).\n\nThe kernel config currently only has the modules as non-builtin which\nrequire firmware, everything else has been left as-is. For boot-time\nperformance it would eventually be a good idea to move to a setup with\nmore modules once we\u0027re confident in the implementation and everything\ncan deal with late-loaded modules/devices.\n\nAs a drive-by fix this also moves the kernel builds to out-of-tree so\nthat we no longer pollute the source folder. Bazel protected us from\nserious issues due to this, but it\u0027s still bad practice.\n\nChange-Id: Iced8e12234565e5b7447e732716651e05e67d55b\nReviewed-on: https://review.monogon.dev/c/monogon/+/1791\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "46bf7d6c6437dfbf9dcc1e1d7d80fcc1c601f9b5", "tree": "19b26feaf61870790ce3b27dac3623cba40e6119", "parents": [ "c7b036bca213962a7e60f3edb47624606799d074" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Thu Jun 01 12:24:19 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Tue Jun 13 13:44:46 2023 +0000" }, "message": "m/n/c/devmgr: init\n\nAdd a minimal device manager based on kobject/uevents. Currently this\nonly loads kernel modules. Further functionality will be added in\nsubsequent CLs.\n\nChange-Id: I444ecdaff3f8ddb9ec169b094ba03e169dd70c4e\nReviewed-on: https://review.monogon.dev/c/monogon/+/1790\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "c7b036bca213962a7e60f3edb47624606799d074", "tree": "f0385f1ff6fe9a9fe41f62f32c0079006a1c5038", "parents": [ "5832cd92957a6933c0fd644496d957ea2d8ef36d" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Thu Jun 01 12:23:57 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Tue Jun 13 13:44:46 2023 +0000" }, "message": "m/p/kmod: init\n\nThis adds a package for working with Linux kernel loadable modules in\nGo. It contains syscall wrappers for loading and unloading modules, a\nmetadata format for fast lookup of modules handling devices using a\ncustom radix tree, parsers for module info metadata and various utility\nfunctions and data structures.\n\nA significant amount of the code in here has no formal spec and is\nwritten against behavior and information extracted from the reference\nkmod code as well as the Linux kernel itself.\n\nChange-Id: I3d527f3631f4dd1832b9cfba2d50aeb03a2b88a8\nReviewed-on: https://review.monogon.dev/c/monogon/+/1789\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "5832cd92957a6933c0fd644496d957ea2d8ef36d", "tree": "23d8faa7707807c1da543dbb91840c308790d694", "parents": [ "0e291a193cbfd0b169e749e7f28adc954a58f560" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Tue Jun 13 13:09:55 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Tue Jun 13 13:26:12 2023 +0000" }, "message": "cloud/bmaas/bmdb/webug: Use a flag for strict consistency\n\nChange-Id: I4ef6372108e4ada94a70525c6ec335e305dca320\nReviewed-on: https://review.monogon.dev/c/monogon/+/1801\nTested-by: Jenkins CI\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\n" }, { "commit": "0e291a193cbfd0b169e749e7f28adc954a58f560", "tree": "01b7ad51279b9060c3c967a0061826d37dbfaf01", "parents": [ "4264b8c641109c05c4828b40cd2e01e686890903" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Thu Jun 01 12:22:45 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Tue Jun 13 13:03:53 2023 +0000" }, "message": "m/node: clean up DNS service\n\nThe primary change in here is that CoreDNS now only listens on the\nloopback interface by default.\nThis fixes #217 as it cannot be accessed from the outside anymore.\nSince the containers do not share the host network namespace, they can\nnow no longer access the DNS service. This is solved by introducing a\nnew Network Service API to add listener IPs and using a link-local IP,\n169.254.77.53 for the container DNS.\nWhile at it, I cleaned up various parts of the DNS code.\n\nChange-Id: Id7b618f62690032db335e8478b9de84410c210a1\nReviewed-on: https://review.monogon.dev/c/monogon/+/1759\nTested-by: Jenkins CI\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\n" }, { "commit": "4264b8c641109c05c4828b40cd2e01e686890903", "tree": "c890d91434d3be41b12291338c55c7d0baf61315", "parents": [ "44cacd6bd39f0d70aab912e4d02f2ef2e453bc4d" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Mon Jun 12 23:54:58 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Tue Jun 13 09:40:46 2023 +0000" }, "message": "cloud: replace klog with klog/v2\n\nChange-Id: Ie54ef593825fdc72409da38ab1a6244e94db9eb9\nReviewed-on: https://review.monogon.dev/c/monogon/+/1799\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "44cacd6bd39f0d70aab912e4d02f2ef2e453bc4d", "tree": "1ab3deae3f63c854bf4e2a89f25937ad062a6130", "parents": [ "f9e3a6558f8725123e4cde38098e80c1167fb47c" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Mon Jun 12 23:54:45 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Tue Jun 13 09:40:46 2023 +0000" }, "message": "cloud: validate that there are not positional arguments\n\nflag.Parse() parses arguments after boolean flags as positional argument.\nThis produces unexpected behaviour like this:\n```\n\u003e -a \"true\" -b \"true\"\na: false\n\n\u003e -a -b \"true\"\nb: true\n```\n\nChange-Id: I0f8555fc45acf305a5efd365a6eae03eb8930942\nReviewed-on: https://review.monogon.dev/c/monogon/+/1798\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "f9e3a6558f8725123e4cde38098e80c1167fb47c", "tree": "7fb7d5397c0bf559e7d66f93565ac429cf489048", "parents": [ "fe3d8fd61a81c09a1544d8cf1e13326c179c5972" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Tue Jun 06 17:39:52 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Wed Jun 07 11:43:47 2023 +0000" }, "message": "cloud/bmaas: correctly format table\n\nChange-Id: Iafa4967d655c31f107167a82909eabc21bb4e2c5\nReviewed-on: https://review.monogon.dev/c/monogon/+/1792\nTested-by: Jenkins CI\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\n" }, { "commit": "fe3d8fd61a81c09a1544d8cf1e13326c179c5972", "tree": "d1803d9e307e5aea697c02fcb17e82e2c4fb605d", "parents": [ "90a70a0e1cab83ba1601d355d07f285dff0d4d55" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue May 30 20:50:09 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Jun 06 12:11:51 2023 +0000" }, "message": "m/n/core/roleserve: rework cluster membership, reuse control plane connections\n\nThis changes up roleserver internals to simplify the handling of cluster\nmembership state. The end goal is to allow reusing control plane gRPC\nconnections across different components in a node, but the refactor goes\na bit beyond that.\n\nEver since the introduction of the rpc resolver, we have effectively\nsimplifies the control plane startup problem. This is because the\nresolver allows the rest of the system to dynamically switch between\ndifferent gRPC endpoints for the control plane.\n\nWhat this means is that some of the existing complexity in the\nroleserver (which predates the resolver) can be thrown away. Notably, we\nremove the ClusterMembership structure, and replace it with two\nsignificantly simpler structures that represent two separate facts about\nhe local node:\n\n1. localControlPlane carries information about whether this node has a\n locally running control plane. This is only used by the statuspusher\n (to report whether the control plane is running) and by the\n Kubernetes control plane.\n\n2. curatorConnection carries the credentials, resolver and an open gRPC\n connection to the control plane, and is the only roleserver\n EventValue now used by the vast majority of the roleserver runnables.\n\nThe resulting code, especially inside the control plane roleserver\nrunnable, is now less complex, at the cost of a bit of an ugly refactor.\n\nChange-Id: Idbe1ff2ac3bfb2d570bed040a2f78ccabb66caba\nReviewed-on: https://review.monogon.dev/c/monogon/+/1749\nTested-by: Jenkins CI\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\n" }, { "commit": "90a70a0e1cab83ba1601d355d07f285dff0d4d55", "tree": "d72351725c2d58ba3194e40f85fa5730ab2a798c", "parents": [ "ce68ab953ef5501a3da3367372daf25801bc0ee7" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue May 30 15:15:27 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Jun 06 12:11:51 2023 +0000" }, "message": "m/n/core/roleserve: do not store cluster directory, populate resolver earlier\n\nThis cleans up the roleserver code slightly, as I\u0027ve noticed the cluster\ndirectory actually does not need to be stored anymore now that we have\nthe rpc resolver.\n\nChange-Id: Ibe9f55691602bc937205c5fb54833683e80d4804\nReviewed-on: https://review.monogon.dev/c/monogon/+/1748\nTested-by: Jenkins CI\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\n" }, { "commit": "ce68ab953ef5501a3da3367372daf25801bc0ee7", "tree": "898dc33bb8a97345b6c3e1ace3ec29c1eb6a5234", "parents": [ "3a3c517696210f23f2c1d74d766ddf5750a3f4b8" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Tue Jun 06 03:32:39 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Tue Jun 06 11:20:51 2023 +0000" }, "message": "m/t/ktest: allow more memory and extra fssepcs\n\nktest until now used the QEMU default memory which is only 128MiB which\ncan be insufficent for tests with more data. Increase that to 1GiB\nwhich is a more reasonable limit. Since ktest doesn\u0027t use any filesystem\ncache in practice this shouldn\u0027t be using much more memory.\n\nAlso allow adding additional fsspecs to ktest which get integrated into\nthe test initramfs.\n\nChange-Id: Ib1a1611cb8e3fdce11a3fac7c0c1ed04097032ea\nReviewed-on: https://review.monogon.dev/c/monogon/+/1788\nTested-by: Jenkins CI\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\n" }, { "commit": "3a3c517696210f23f2c1d74d766ddf5750a3f4b8", "tree": "f20c99b0329b5895948e1cef5991dde8e5483a79", "parents": [ "fd6d4ebffd699ed87cd8bb41dd7a74e40cbe519c" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Thu Jun 01 19:54:17 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Tue Jun 06 01:46:23 2023 +0000" }, "message": "m/c/metroctl/test: deflake test\n\nThis test was flaky as the node picked to run takeownership against was\ndependent on map key order. Only the first node runs the relevant\ncontrol plane services, thus if the second node was iterated over first,\nthe test broke. Fix this by using the NodeIDs slice to get deterministic\nordering and always pick the first node.\n\nChange-Id: Id4ac162a8295be4e84ad439ac5b70ff5a968af04\nReviewed-on: https://review.monogon.dev/c/monogon/+/1784\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "fd6d4ebffd699ed87cd8bb41dd7a74e40cbe519c", "tree": "8cb613a43199be0dd5a93d98955c95f8d3e7779d", "parents": [ "f1628ac0972b8ee7da19322514dc229872b5982b" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Thu May 25 14:45:48 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed May 31 12:25:21 2023 +0000" }, "message": "m/node: introduce node storage setting and cluster policy\n\nThis adds NodeStorageSecurity and a corresponding\nClusterConfiguration.StorageSecurityPolicy, and pipes it into the\nMetropolis node bootstrap and registration flow.\n\nAll the various settings have so far only been tested manually. For now\nthe default behaviour (which is exercised by tests) is the same as\npreviously: require encryption and authentication.\n\nIn the future, we will have to expand our end-to-end testing to properly\nexercise all the various settings and verify their enforcement and\neffect. But that has to come in a follow-up CR as this one is already\nlarge enough as is.\n\nChange-Id: I76f3e37639ef02f4fc708af47ae5014408dc7c21\nReviewed-on: https://review.monogon.dev/c/monogon/+/1747\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "f1628ac0972b8ee7da19322514dc229872b5982b", "tree": "9720402ab66d83dbd69844ffea60403e73756f26", "parents": [ "2b0f3d3df1fd3f71b57bb2ea581a649678b2451e" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Thu May 25 14:43:19 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed May 31 12:25:21 2023 +0000" }, "message": "m/n/core/localstorage/crypt: support more enc/auth modes\n\nThis is in preparation for introducing configurable disk\nencryption/authentication policies in Metropolis (eg. low integrity\nmode).\n\nWe also use the opportunity to add some tests for the newly refactored\ncrypt library. All modes go through an end-to-end test making sure data\nis preserved and repeatedly mapping/unmapping the device works.\n\nThis change also disables insecure mode in debug builds. The equivalent\nfunctionality will be re-established at a higher level in the cluster\ncode in a subsequent change, alongside the encryption/authentication\npolicy code.\n\nChange-Id: I85db001c7c37a918cb491b1fcc3a51ea1d715817\nReviewed-on: https://review.monogon.dev/c/monogon/+/1724\nTested-by: Jenkins CI\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\n" }, { "commit": "2b0f3d3df1fd3f71b57bb2ea581a649678b2451e", "tree": "1018cd62c66bff7c239ae4df9ff076b4b4c832c9", "parents": [ "886c386f9acf84d2600878c61e5f1822a5fb8c1b" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Wed May 03 15:39:11 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Wed May 31 11:29:13 2023 +0000" }, "message": "m/n/c/network: set status with static config\n\nThis makes the static network service also set the network state if no\nautoconfiguration is in use.\nThis is currently quite hacky, it essentially checks if any interface\nuses IPv4 autoconfig/DHCP and if not it choses the first IPv4 address\nand sets that as the external address.\n\nChange-Id: I53cebfaa373512eec3d26c59640c0328297acf32\nReviewed-on: https://review.monogon.dev/c/monogon/+/1644\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "886c386f9acf84d2600878c61e5f1822a5fb8c1b", "tree": "e7c747d479e3d9854233894db49dc0a77c9ed43f", "parents": [ "8180de90e9b90601cb87feac51426e7f39abc747" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Tue May 23 16:47:41 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Tue May 30 20:37:36 2023 +0000" }, "message": "c/s/e/cli: add equinix api cli tooling\n\nThis is a fairly simple and hacked together cli but it does its job for basic maintenance tasks\n\nChange-Id: I043c12b930546f9405b9f8190326724122f1c0aa\nReviewed-on: https://review.monogon.dev/c/monogon/+/1704\nTested-by: Jenkins CI\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\n" }, { "commit": "8180de90e9b90601cb87feac51426e7f39abc747", "tree": "dfe750f650d7d3b16972f541e521d3e01f3898f2", "parents": [ "7c38eef75b395b0515e34e2059091f8b0f8d3daf" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Thu May 11 19:45:37 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Tue May 30 20:37:36 2023 +0000" }, "message": "c/s/e/wrapngo: add more api wrappers\n\nChange-Id: I826a799cccc609d95b1ea3bd933b019558690c59\nReviewed-on: https://review.monogon.dev/c/monogon/+/1556\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "7c38eef75b395b0515e34e2059091f8b0f8d3daf", "tree": "636f2fa665d79f14109e10a3abc7d277b1ab73a3", "parents": [ "f2af76024340e782002f5d07333e2f3d09031554" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Wed May 24 14:48:14 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Tue May 30 16:29:11 2023 +0000" }, "message": "third_party/linux: refresh config\n\nRan oldconfig from 5.15.104, no functional changes intended.\n\nThis is to make subsequent changes easier to review.\n\nChange-Id: I420073d3c8fdc8ce96a4ec22061c4158d9f99a9e\nReviewed-on: https://review.monogon.dev/c/monogon/+/1709\nTested-by: Jenkins CI\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\n" }, { "commit": "f2af76024340e782002f5d07333e2f3d09031554", "tree": "fcdf868bbbd891404514b5ee06a6716ab8e8d9fb", "parents": [ "2d1ebd3567567d9e6563776e637006c1d8d88e68" ], "author": { "name": "Florian Klink", "email": "flokli@flokli.de", "time": "Sat May 27 17:55:21 2023 +0300" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Mon May 29 21:11:43 2023 +0000" }, "message": "metropolis/node/core/minit: update year in copyright header\n\nThis updates the copyright line to include 2023.\n\nChange-Id: I8442cb10d369ee1a13485f601242fee65c210ede\nReviewed-on: https://review.monogon.dev/c/monogon/+/1725\nVouch-Run-CI: Lorenz Brun \u003clorenz@monogon.tech\u003e\nTested-by: Jenkins CI\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\n" }, { "commit": "2d1ebd3567567d9e6563776e637006c1d8d88e68", "tree": "00305a6b2ddf285998adc442a893e4ca9a22773e", "parents": [ "c59c515435eff154d15c8f4f84ba9b83f93a94c8" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Tue May 23 01:53:12 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Tue May 23 13:25:20 2023 +0000" }, "message": "build/toolchain: remove deprecated use of @bazel_tools\n\n@bazel_tools//platforms will be removed with bazel 6.\nhttps://github.com/bazelbuild/bazel/issues/8622\n\nChange-Id: Iee484f68d76d83ec6d874d0eb4457bb273dc5ed8\nReviewed-on: https://review.monogon.dev/c/monogon/+/1703\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "c59c515435eff154d15c8f4f84ba9b83f93a94c8", "tree": "b78a15dc2e31d881a8c03b4fb2ca4baad48d413a", "parents": [ "c3b0828e6e3913eec277af22385f346bf0710bfa" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Thu May 11 16:15:30 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Mon May 15 10:59:19 2023 +0000" }, "message": "cloud/bmaas: do not start/recover agent on installed machines\n\nThis prevents us from perpetually restarting machines (or otherwise\nattempting to get the agent running) on machines that have a \u0027fulfilled\u0027\ninstallation request, ie. machines with a machine generation in their\ninstallation request/report tags.\n\nThe recovery flow will still kick in when a new installation request\ncomes in after a machine has been sucesffuly installed, and that will\nstill cause a reboot loop (as even rebooting the machine does not allow\nus to start an agent anymore if it has been installed). But we\u0027ll fix\nthat later.\n\nChange-Id: I49bb81be5d35ef600e18021bdf98bb207bb8d5a7\nReviewed-on: https://review.monogon.dev/c/monogon/+/1672\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "c3b0828e6e3913eec277af22385f346bf0710bfa", "tree": "fc7b8d7130bff9f6167193c2060db4f6806ba29f", "parents": [ "d03df119187ac7c00c07be585e20f790cc0daab4" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Thu May 04 16:39:15 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Mon May 08 12:21:25 2023 +0000" }, "message": "cloud/bmaas/bmdb/webug: add color coding for host status\n\nTo allow easier understanding of a backoff without opening the machine itself,\nits handy to have a color coding for the provider host status. Currently it only displays\nrunning as green and everything else as red, but that should be fine for now.\n\nChange-Id: I5f16cd6a0b14dc595c94f6ca1e647d3ba1f21d95\nReviewed-on: https://review.monogon.dev/c/monogon/+/1647\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "d03df119187ac7c00c07be585e20f790cc0daab4", "tree": "62c90dc3f6de7de0f2d35818adb558b7a42b3baf", "parents": [ "93b6fadb35d57b685ceb44530baaa79a7ed61fa4" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Thu May 04 16:38:49 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Mon May 08 12:21:25 2023 +0000" }, "message": "cloud/bmaas/bmdb/webug: add location tag to host list\n\nChange-Id: I86e00fe3534cdc62fef73931647f15d6346ea1bf\nReviewed-on: https://review.monogon.dev/c/monogon/+/1646\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "93b6fadb35d57b685ceb44530baaa79a7ed61fa4", "tree": "adb4115e12e90bd836bcd4183d95a83aec4b7ecd", "parents": [ "ab583b389efd2f334dda56e858fa298987d15cc8" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Thu May 04 16:35:17 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Mon May 08 12:21:25 2023 +0000" }, "message": "cloud/bmaas/bmdb/webug: rename .html to .gohtml\n\nIntelliJ doesn\u0027t like overriding the type manually,\nso lets just stick to their standard.\n\nChange-Id: Ie533d884b06c62d6da6b8504051737b239fb8489\nReviewed-on: https://review.monogon.dev/c/monogon/+/1645\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "ab583b389efd2f334dda56e858fa298987d15cc8", "tree": "e9592d2a3173807168be265e3728fead655b0e1e", "parents": [ "a3904fc44595376bc725fed7ac74dfa80d1ada94" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Tue May 02 22:41:45 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Wed May 03 13:31:56 2023 +0000" }, "message": "m/n/core: always start network service\n\nFix logic bug causing the network service not to be started when\nstatic network config is in use.\n\nWe really need tests for this.\n\nChange-Id: I8ae29809ee453891f0781aa4e1b9f7a160610bff\nReviewed-on: https://review.monogon.dev/c/monogon/+/1643\nTested-by: Jenkins CI\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\n" }, { "commit": "a3904fc44595376bc725fed7ac74dfa80d1ada94", "tree": "47d1177071dd190b6409731959d7bc471aaa7229", "parents": [ "ca9cfcf9cfbb0ae46ee4f6f0d207cdbd7085e460" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Tue May 02 19:33:52 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Wed May 03 09:47:02 2023 +0000" }, "message": "m/n/c/l/crypt: select partitions more specifically\n\nThis changes partition selection to only consider block devices which\ncontain the ESP we booted from if known.\n\nThis prevents us from mounting spurious partitions sharing the same\ntype identifiers.\n\nWhile at it, convert to our GPT library.\n\nChange-Id: Ie9f5bd596f793439a467759d5066529f3912028b\nReviewed-on: https://review.monogon.dev/c/monogon/+/1641\nTested-by: Jenkins CI\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\n" }, { "commit": "ca9cfcf9cfbb0ae46ee4f6f0d207cdbd7085e460", "tree": "772b7ebfbdfb6c0544860a919a346bcb462874bd", "parents": [ "0508c6df9ab35ebbf0f0367ba1f7ed74bdfb20c8" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Tue May 02 19:29:14 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Wed May 03 09:47:02 2023 +0000" }, "message": "m/p/{efivars,sysfs}: use typed UUIDs\n\nThe functions ReadLoaderDevicePartUUID and DeviceByPartUUID passed\naround UUIDs as strings. This is inconvenient as UUID strings are not\nnormalized and thus require special care.\n\nSwitch to Google\u0027s uuid library and use their type, same as most other\nthings in the monorepo.\n\nChange-Id: I19deed804cff7036f756257fbf5689570cccc812\nReviewed-on: https://review.monogon.dev/c/monogon/+/1640\nTested-by: Jenkins CI\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\n" }, { "commit": "0508c6df9ab35ebbf0f0367ba1f7ed74bdfb20c8", "tree": "93f0a16c0770ad473d5ad0b89ddcf00bea652293", "parents": [ "f0b22ff77c0126ac092aa1c6965f08a7c50002a1" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Tue May 02 18:56:03 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Wed May 03 09:47:02 2023 +0000" }, "message": "m/n/c/cluster: fix logic error in bootstrap\n\nThere was a missing condition in there, causing the code to erroneously\nreturn with an error even though none occurred.\n\nChange-Id: Ib36f3f1606508655ed5990aed624ef51c45a3b97\nReviewed-on: https://review.monogon.dev/c/monogon/+/1638\nTested-by: Jenkins CI\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\n" }, { "commit": "f0b22ff77c0126ac092aa1c6965f08a7c50002a1", "tree": "e957358311a40371a2ab77f5c86d25035d03ed43", "parents": [ "dea7cd0e3d0aeee571f25209d76b52cc495a389f" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Tue May 02 16:04:20 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Tue May 02 15:12:13 2023 +0000" }, "message": "m/node: also log to ttyS1\n\nSome systems have their serial console connected to ttyS1, not ttyS0.\nWe currently have no way of passing this information to the system as we\nlock down boot parameters and\nthere is significant risk in letting people change this, both in terms\nof security (some kernel parameters can affect the integrity of the OS)\nas well as availability as such a setting needs to be respected by both\nA and B loaders, thus any misconfiguration could make the node\nnon-functional without an obvious way to roll back.\n\nThus this just adds ttyS1 to the list of serial consoles for the time\nbeing. When we have such a mechanism, we\u0027ll likely undo the hardcoding\nof all consoles anyways.\n\nFixes #216\n\nChange-Id: I2f35edad049ceae1bb5cfc22b89bf6a1664cfbf8\nReviewed-on: https://review.monogon.dev/c/monogon/+/1625\nTested-by: Jenkins CI\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\n" }, { "commit": "dea7cd0e3d0aeee571f25209d76b52cc495a389f", "tree": "9aa755c3488f2db6f15327a3f0feef7147a434a3", "parents": [ "c50f69427b1bb1816fa1ae8ecbdd1f00651f1e7f" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed Apr 26 13:58:17 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Thu Apr 27 12:34:43 2023 +0000" }, "message": "cloud/shepherd: add equinix API metrics\n\nThis adds the following signals to our interaction with the Equinix API:\n\n 1. Latency\n 2. Traffic\n 3. Errors\n 4. Saturation\n\nChange-Id: Ic2d5e36a7a26ab906ac1c2fa6741ebf86b9e551a\nReviewed-on: https://review.monogon.dev/c/monogon/+/1606\nTested-by: Jenkins CI\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\n" }, { "commit": "c50f69427b1bb1816fa1ae8ecbdd1f00651f1e7f", "tree": "0db95195b72142bfbfd9054d2505d40c99ccc6a4", "parents": [ "2bffb6fd2e9af6c4b0e79a1d69a4be1a3275ba40" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Mon Apr 24 18:27:22 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Apr 25 12:45:16 2023 +0000" }, "message": "cloud/bmaas/bmdb: implement BMDB client metrics\n\nThis implements some basic BMDB metrics exported by any client code\nusing the BMDB.\n\nIt also enables their use in the Shepherd and BMSRV.\n\nChange-Id: I1d5e82fd2c34a7bfd42f37fad540d69f7b23f347\nReviewed-on: https://review.monogon.dev/c/monogon/+/1600\nTested-by: Jenkins CI\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\n" }, { "commit": "2bffb6fd2e9af6c4b0e79a1d69a4be1a3275ba40", "tree": "f9b1d0995aba398b61f8de21be877ea50ecd1309", "parents": [ "fbda89eeab18b56d0d9908829532e8c86c5e9e6b" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Mon Apr 24 19:06:10 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Tue Apr 25 12:03:12 2023 +0000" }, "message": "c/b/b/reflection: support bigint OSInstallationRequest\n\nChange-Id: Id677ec97f2acd8102bb0e8a5366d54db8dd53d13\nReviewed-on: https://review.monogon.dev/c/monogon/+/1604\nTested-by: Jenkins CI\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\n" }, { "commit": "fbda89eeab18b56d0d9908829532e8c86c5e9e6b", "tree": "df7d6823c4315c4d69b21def8f7ad5cbe5b10d55", "parents": [ "00cf57dd411af5f5c9aa21ced2a2d6c67729297c" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Mon Apr 24 17:43:58 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Apr 25 11:56:50 2023 +0000" }, "message": "cloud: enable prometheus server\n\nThis makes cloud components start a Prometheus server on a separate port\n(:4243 by default) using either gRPC TLS credentials or plain HTTP.\n\nThe Prometheus server currently only export the standard Go/Process\nmetrics that the default Prometheus library exports.\n\nChange-Id: I9f2ae20c34446c0e10a946d4a93251764f5d2fce\nReviewed-on: https://review.monogon.dev/c/monogon/+/1599\nReviewed-by: Leopold Schabel \u003cleo@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "00cf57dd411af5f5c9aa21ced2a2d6c67729297c", "tree": "bdd35f818c7aca6d2f0bac93501d7a56fcfc2911", "parents": [ "afd3cf8bb5c99e9a8db23a5f435f7c1e31c96f91" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Thu Apr 20 11:19:00 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Apr 25 11:56:50 2023 +0000" }, "message": "cloud/bmaas: split ShepherdAccess into Shepherd{AgentStart,Recovery}\n\nThis effectively undoes our previous attempted consolidation of all\nShepherd accesses under one tag. We now use two separate tags for the\ntwo main Shepherd work processes, and mutually exclude them in SQL.\n\nWe do this so that we can see more clearly in work history (and in\ngeneral when processing machines) what the Shepherd is actually trying\nto do to a machine.\n\nThe downside of this implementation is that we now extend the BMDB/ETP\nmodel to being able to mutually exclude different processes. This is\neasy enough to express in SQL, but might make future generic modelling\nmore difficult.\n\nAn alternative would be to add an extra field to work/work history that\nacts as an informative field for operators to know the details of a work\nitem. We might still want to do that in the future. However, that field\nbeing freeform, we could not really rely on it for machine parsing.\n\nChange-Id: I9578ac000f6112514fe587e9fddf7e85671c6437\nReviewed-on: https://review.monogon.dev/c/monogon/+/1584\nReviewed-by: Leopold Schabel \u003cleo@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "afd3cf8bb5c99e9a8db23a5f435f7c1e31c96f91", "tree": "092e34305b19af962cac644a1551822c436f1060", "parents": [ "fac487481bf56e9510ff9a528c6729b2427d42b1" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed Apr 19 17:43:46 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Apr 25 11:56:50 2023 +0000" }, "message": "cloud/shepherd/equinix: update provider extra data\n\nThis adds a new sub-component to the Equinix Shepherd, the Updater.\n\nThe Updater periodically scans all machines backed by the Equinix\nprovider in the BMDB and queries the Equinix API for their status. The\nstatus then populates the new \u0027Provided\u0027 row data.\n\nChange-Id: I99657545aabfb13d71e165d36ce549c852feaf49\nReviewed-on: https://review.monogon.dev/c/monogon/+/1578\nTested-by: Jenkins CI\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\n" }, { "commit": "fac487481bf56e9510ff9a528c6729b2427d42b1", "tree": "57134f773547af8a674215aee45dc53827373cd6", "parents": [ "0b63df4c126e0ded722826b1cb612bad71822165" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Mon Apr 24 19:04:55 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Tue Apr 25 10:58:55 2023 +0000" }, "message": "cloud/agent: default to detected NetworkConfig installing OS\n\nThe agent should pick the detected NetworkConfig if the OSInstallRequest\ndoes not contain a NetworkConfig\n\nChange-Id: I27f75735907b7c993dcd7002a863cd8fe00699fa\nReviewed-on: https://review.monogon.dev/c/monogon/+/1602\nTested-by: Jenkins CI\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\n" }, { "commit": "0b63df4c126e0ded722826b1cb612bad71822165", "tree": "6b2e6b8114869313fbdfbd0df396f6bb6da7927c", "parents": [ "9a627617dbcfdd5d998a68bfd8d38597c694af0a" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Mon Apr 24 19:04:07 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Tue Apr 25 10:58:55 2023 +0000" }, "message": "m/p/common: set visibility to public\n\nTo allow usage inside cloud tooling the visibility needs to be public\n\nChange-Id: Ibcc4ca969e2de31c95f8ab8479ce2d7f4fb740d7\nReviewed-on: https://review.monogon.dev/c/monogon/+/1601\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "9a627617dbcfdd5d998a68bfd8d38597c694af0a", "tree": "c0ae1abfed99611bb0f633e63bac05dca47dd8a9", "parents": [ "26c1817e12e9c55f7ab12b7741b16508a004e079" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Mon Apr 24 17:40:18 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Apr 25 09:45:20 2023 +0000" }, "message": "cloud/lib/component: fix gRPC client cert verification\n\nChange-Id: I5eda3e9e898c25a804ed8570150b6b05777b41e2\nReviewed-on: https://review.monogon.dev/c/monogon/+/1596\nTested-by: Jenkins CI\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\n" }, { "commit": "26c1817e12e9c55f7ab12b7741b16508a004e079", "tree": "f07ee5eb0ce7aaa3050590ffbc95be9a02b723a4", "parents": [ "9fbe838dd02f301106d7cfcbbfd2a8ef9e458775" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Mon Apr 24 17:40:48 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Apr 25 09:45:15 2023 +0000" }, "message": "cloud/lib/component: make component devcerts client/server\n\nChange-Id: Ib2329e7788440222e1e5362e0f821ec431479025\nReviewed-on: https://review.monogon.dev/c/monogon/+/1597\nTested-by: Jenkins CI\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\n" }, { "commit": "9fbe838dd02f301106d7cfcbbfd2a8ef9e458775", "tree": "7ba195f5e57d342d54503569da5c08161f37db30", "parents": [ "913a03a9eb220adfba3a9dd73bce1fba7ba5aeb1" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Mon Apr 24 19:05:10 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Mon Apr 24 19:32:34 2023 +0000" }, "message": "c/b/server/api: fix typo\n\nChange-Id: I2fe54243b900d929c9b88159250d020a79088b08\nReviewed-on: https://review.monogon.dev/c/monogon/+/1603\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "913a03a9eb220adfba3a9dd73bce1fba7ba5aeb1", "tree": "0fbe31e31c68dff595121473f8e30c2d508c2ddb", "parents": [ "cd7343ed524944d16a46edbccfaf47a113394f5f" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Mon Apr 24 15:57:02 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Mon Apr 24 19:16:26 2023 +0000" }, "message": "c/s/e/manager: add sleep after reboot\n\nThis is required as Equinix doesn\u0027t reboot the machines synchronously\nduring the API call.\n\nChange-Id: Ie01b7ed5c57868e1c60a33af934a50e7338ce3ac\nReviewed-on: https://review.monogon.dev/c/monogon/+/1595\nTested-by: Jenkins CI\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\n" }, { "commit": "cd7343ed524944d16a46edbccfaf47a113394f5f", "tree": "42400aac5bd5c4b64a4f6065a7b7e722652ad261", "parents": [ "cdb325ee1cd0b3f3e6db46d8d933d0ab519a5d14" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Mon Apr 24 17:44:17 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Mon Apr 24 17:17:55 2023 +0000" }, "message": "c/bmaas/bmsrv: use clicontext\n\nChange-Id: Idb5e43ef38e1ae294409cf1c99d88426623f824e\nReviewed-on: https://review.monogon.dev/c/monogon/+/1598\nTested-by: Jenkins CI\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\n" }, { "commit": "cdb325ee1cd0b3f3e6db46d8d933d0ab519a5d14", "tree": "2eb92316a7168f5854a85d73e7c1c2faae47c475", "parents": [ "00343808fb93a070f99c259e4ad9b7294e22e767" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed Apr 19 15:36:38 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Mon Apr 24 09:00:34 2023 +0000" }, "message": "cloud/bmaas: add extra provider tags\n\nChange-Id: I403451f452a7c94a7661e49df06f4046f9f91422\nReviewed-on: https://review.monogon.dev/c/monogon/+/1577\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\nReviewed-by: Leopold Schabel \u003cleo@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "00343808fb93a070f99c259e4ad9b7294e22e767", "tree": "8bbf40ac7ef5b2a580ae84e613fc5e2e0df26782", "parents": [ "333cb8bd69852ebb2010fc821e525345f0e6a8a9" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Thu Apr 20 17:04:32 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Fri Apr 21 10:21:02 2023 +0000" }, "message": "c/agent: add timeout to Heartbeat RPCs\n\ngRPC recommends adding a deadline or timeout to all RPCs, let\u0027s also do\nthat here to avoid a single RPC from taking too long and causing the\nagent to be restarted because it missed a heartbeat.\n\nChange-Id: I99b413ce09fbfba93f1fc49fc5ca2da440f0d30e\nReviewed-on: https://review.monogon.dev/c/monogon/+/1590\nTested-by: Jenkins CI\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\n" }, { "commit": "333cb8bd69852ebb2010fc821e525345f0e6a8a9", "tree": "e558dea1d60afb41a0694ffd0bcd5db5134e4c6c", "parents": [ "76e39d81415a51926e784d441760773574ecbdb9" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Thu Apr 20 23:10:39 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Fri Apr 21 10:21:02 2023 +0000" }, "message": "t/linux: patch out static virtual interfaces\n\nA few virtual drivers (bonding, dummy) predate netlink (~2003), which\nmeans that the kernel had no way to dynamically create network\ninterfaces.\nThe solution was kernel module paramter which statically precreated a\nlist of these virtual interfaces. The number was generally set to 1 by\ndefault, meaning that loading the module creates one of its interface.\n\nFor compatibility with legacy userspaces this is still kept around. We\ncould set the parameters to zero, but doing that everywhere is a pain.\nThis just patches the default values to zero.\n\nChange-Id: I605781b80fb8b20a7724e7fdfa5a4f75ca25eea1\nReviewed-on: https://review.monogon.dev/c/monogon/+/1589\nTested-by: Jenkins CI\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\n" }, { "commit": "76e39d81415a51926e784d441760773574ecbdb9", "tree": "f826797d76881dfdc21dbca5ea8ddd673ac3d5ff", "parents": [ "f984e1eaea94cfdbd6bc23ab438f02028800fb9c" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Thu Apr 20 22:55:15 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Fri Apr 21 10:21:02 2023 +0000" }, "message": "m/n/c/network: fix add/modify condition\n\nThe unset value for Index is 0, not -1. This caused new links to\nincorrectly use the LinkModify path.\n\nChange-Id: I92f3fcaa8e4df9097251e3e27bd69c75a2ad878b\nReviewed-on: https://review.monogon.dev/c/monogon/+/1588\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "f984e1eaea94cfdbd6bc23ab438f02028800fb9c", "tree": "dc627288a4205590e3f441e9b0a4199f1d480834", "parents": [ "213d90c4f27478bcdac4a9429422cf496f989431" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Wed Apr 19 23:12:38 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Thu Apr 20 11:47:57 2023 +0000" }, "message": "c/b/b/webug: add tag count table\n\nChange-Id: I9662f00629335a656c401f66c798575f7db57842\nReviewed-on: https://review.monogon.dev/c/monogon/+/1583\nTested-by: Jenkins CI\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\n" }, { "commit": "213d90c4f27478bcdac4a9429422cf496f989431", "tree": "dc98a19b90b1dbe36c6fd09aa241ccbb8c407f3f", "parents": [ "4969fd72246bf4d50436a22acbb1bdcdaa72a0e9" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed Apr 19 17:42:06 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Thu Apr 20 08:47:22 2023 +0000" }, "message": "third_party: update sqlc and pganalyze\n\nChange-Id: I82e0d2dfe507c834f64b5cd9a64c5e0071c07620\nReviewed-on: https://review.monogon.dev/c/monogon/+/1575\nTested-by: Jenkins CI\nReviewed-by: Leopold Schabel \u003cleo@monogon.tech\u003e\n" }, { "commit": "4969fd72246bf4d50436a22acbb1bdcdaa72a0e9", "tree": "5373a7a45fe6920443aa3639ce72aaa5c34c8ec2", "parents": [ "1cd2696d61071b072a24dbe127d9d95874377d66" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed Apr 19 17:43:12 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Thu Apr 20 08:47:22 2023 +0000" }, "message": "cloud/shepherd/equinix/wrapngo: allow specifying options when getting device\n\nChange-Id: Ib1f4a88d1a45d9c0da1c56bd8ee21bf18302d9f8\nReviewed-on: https://review.monogon.dev/c/monogon/+/1576\nTested-by: Jenkins CI\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\n" }, { "commit": "1cd2696d61071b072a24dbe127d9d95874377d66", "tree": "fd9103766990c64daecec87fc9625bc267ba1cc5", "parents": [ "3ea40da4d6642593f7535dc71084b3367c6eb35e" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Wed Apr 19 16:10:17 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Wed Apr 19 18:24:40 2023 +0000" }, "message": "c/agent: include EFI support in hardware report\n\nAdds firmware EFI support status to the hardware report.\nIt is represented as an enum which is populated based on two different\ndata sources. The ENABLED state is set if Linux has EFI runtime\nservices available. The SUPPORTED/UNSUPPORTED states depend on the\nSMBIOS tables provided by the firmware\nand are used if EFI runtime services are not available.\nIf neither are available, UNKNOWN is used.\n\nChange-Id: I7642ccda14d5494294a7463755de18e73a8a9c53\nReviewed-on: https://review.monogon.dev/c/monogon/+/1571\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "3ea40da4d6642593f7535dc71084b3367c6eb35e", "tree": "93e73362243369578733bd3755a8d059dadd7ae3", "parents": [ "20312b40ed4644c64581b4cc8d93a0fc0035fc71" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed Apr 19 14:32:37 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed Apr 19 15:42:44 2023 +0000" }, "message": "cloud/bmaas: test and document upgrades across migrations\n\nChange-Id: I1c405b0f2ecc10331b79d02deb8a63f3b148f502\nReviewed-on: https://review.monogon.dev/c/monogon/+/1566\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "20312b40ed4644c64581b4cc8d93a0fc0035fc71", "tree": "5b812982e0b5bfd7ef0c10659393d37ad0062d62", "parents": [ "ff619354a126df5acffd78ee2f072a17d074e7ab" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed Apr 19 13:49:47 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed Apr 19 15:42:44 2023 +0000" }, "message": "cloud/bmaas: implement exponential backoffs\n\nThis lets work fail with a proper exponential backoff. This is important\nnot just to not hammer external systems, but also to not end up with\nexteremely long and verbose historical logs for repeatedly failing\nprocesses.\n\nTo implement these, we have to slightly alter our model: instead of\nalways persisting backoffs for a given machine, we only persist them as\nlong as the last work for a given process has failed, deleting pertinent\nbackoffs (if any) on success. Then, the existence of a backoff item is\nused to calculate the value of the next backoff.\n\nThe change also introduces and explicit period, in seconds, to the\nbackoff item. It is currently implemented as a nullable field, but a\nfuture migration/update might make them non-nullable (and delete any\nstraggling backoffs that still don\u0027t have the period set).\n\nChange-Id: I958fcd957dae1156349224f07fb8d4836955d375\nReviewed-on: https://review.monogon.dev/c/monogon/+/1565\nTested-by: Jenkins CI\nReviewed-by: Lorenz Brun \u003clorenz@monogon.tech\u003e\n" }, { "commit": "ff619354a126df5acffd78ee2f072a17d074e7ab", "tree": "a873c1feea47b816132f762178b8fb53e040955c", "parents": [ "28fcddc459d020bebf32d1385e2c89fb86e42085" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Wed Apr 19 15:46:08 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Wed Apr 19 14:17:10 2023 +0000" }, "message": "c/s/e/manager: add RID and hostname to log message\n\nChange-Id: I80f885461641b206e7a49165bade157599b405d9\nReviewed-on: https://review.monogon.dev/c/monogon/+/1570\nTested-by: Jenkins CI\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\n" }, { "commit": "28fcddc459d020bebf32d1385e2c89fb86e42085", "tree": "c8339f063a6b3c12dd64973698e4b49694635ee1", "parents": [ "ae00468363b0006ecf1ae90ed3833bbe54820df5" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Wed Apr 19 15:34:25 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Wed Apr 19 14:12:57 2023 +0000" }, "message": "c/s/e/manager: add UseProjectKeys flag\n\nWhen ProjectSSHKeys is set inside a DeviceCreateRequest, only the given SSH keys are added. For debug purposes it is useful to leave it empty and fall back to the default behaviour of equinix which adds all keys that are defined inside the project\n\nChange-Id: I5f4a0d4b3bdc4b183653afd715b4104af2c2a701\nReviewed-on: https://review.monogon.dev/c/monogon/+/1569\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "ae00468363b0006ecf1ae90ed3833bbe54820df5", "tree": "3dff4cdf264bed17e66f7aed2c8085b67738104d", "parents": [ "86a714d6e81bb524dc59fda7baa63b45e7180489" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Apr 18 13:28:48 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed Apr 19 13:55:01 2023 +0000" }, "message": "cloud/shepherd/equinix: implement recoverer\n\nThis implements basic recovery functionality for \u0027stuck\u0027 agents. The\nshepherd will notice machines with a agent that either never sent a\nheartbeat, or stopped sending heartbeats, and will remove their agent\nstarted tags and reboot the machine. Then, the main agent start logic\nshould kick in again.\n\nMore complex recovery flows can be implemented later, this will do for\nnow.\n\nChange-Id: I2c1b0d0465e4e302cdecce950a041581c2dc8548\nReviewed-on: https://review.monogon.dev/c/monogon/+/1560\nTested-by: Jenkins CI\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\n" }, { "commit": "86a714d6e81bb524dc59fda7baa63b45e7180489", "tree": "1d1cadea7a23d82d40144e3d9988d31fbe26270f", "parents": [ "42f13465aa2a2b57c2971d20219f15aeb2a21f3e" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Mon Apr 17 15:54:21 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed Apr 19 13:55:01 2023 +0000" }, "message": "cloud/shepherd/equinix: split out control loop logic\n\nThis is in preparation for implementing the recoverer/rebooter inside\nthe shepherd.\n\nIn the future this will likely be split away from from the shepherd and\nend up as a generic bmdb library. But let\u0027s first wait for concrete\nusages outside of the shepherd component.\n\nChange-Id: I69b9a2e913dcefa2c6558e271b6853285c6120b3\nReviewed-on: https://review.monogon.dev/c/monogon/+/1559\nTested-by: Jenkins CI\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\n" }, { "commit": "42f13465aa2a2b57c2971d20219f15aeb2a21f3e", "tree": "39a77fc69f1ee325edad029bf15eb4277b1f30be", "parents": [ "0d58cb9592852ddb9cc767a33958c65b5eab8deb" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed Apr 19 15:00:06 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Wed Apr 19 13:42:17 2023 +0000" }, "message": "cloud/bmaas/server: do not start BMDB session per RPC\n\nFixes https://github.com/monogon-dev/monogon/issues/198\n\nChange-Id: Ia99b9a47bfc9ae6de0b9e12e13add891dea289a5\nReviewed-on: https://review.monogon.dev/c/monogon/+/1567\nReviewed-by: Leopold Schabel \u003cleo@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "0d58cb9592852ddb9cc767a33958c65b5eab8deb", "tree": "dffec8a2fc8278408f3d22e35588b3ce024044cf", "parents": [ "d1b174725e1fd9c40201bbd6047f6bc0755c8e34" ], "author": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Mon Apr 17 18:38:56 2023 +0200" }, "committer": { "name": "Serge Bazanski", "email": "serge@monogon.tech", "time": "Tue Apr 18 16:13:46 2023 +0000" }, "message": "c/shepherd/equinix/wrapngo: isolate live API tests\n\nSo far all wrapngo tests were fired directly against a live Equinix\nendpoint, and the entire test harness was skipped if such an endpoint\nwas not configured/available.\n\nThis consolidates all of the live tests into a single test with\nsub-tests, and only that test is skipped if endpoint data is not\nprovided.\n\nThis will in turn allow us to have some unit/regression tests for\nwrapngo that do not need to contact the live Equinix API.\n\nChange-Id: I2590a41b935b5d5417520d7510025f6289cece63\nReviewed-on: https://review.monogon.dev/c/monogon/+/1557\nTested-by: Jenkins CI\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\n" }, { "commit": "d1b174725e1fd9c40201bbd6047f6bc0755c8e34", "tree": "ea8bc7eddf418d30ed27e7b1847d0152b70abbb3", "parents": [ "ea94663006eb84ab97d2097e989d5169c75deb2a" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Tue Apr 18 03:49:12 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Tue Apr 18 14:21:21 2023 +0000" }, "message": "c/s/e/wrapngo: workaround for unstable pagination\n\nThe packngo API doesnt have a stable pagination. This leads to duplicate entries and invalid lists. To increase the chance of having a correct response, we sort the list by hostname and pray to the RNG gods\n\nChange-Id: Ie31b823eac8a3fef260ea56861894976b3354d71\nReviewed-on: https://review.monogon.dev/c/monogon/+/1555\nTested-by: Jenkins CI\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\n" }, { "commit": "ea94663006eb84ab97d2097e989d5169c75deb2a", "tree": "e51c56de04ff5aaf04ec77c2d09b10543f58206c", "parents": [ "b44a5076cec5a8863ae9ff26fd641d6b62911aac" ], "author": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Tue Apr 18 03:46:58 2023 +0200" }, "committer": { "name": "Tim Windelschmidt", "email": "tim@monogon.tech", "time": "Tue Apr 18 14:21:21 2023 +0000" }, "message": "c/s/e/manager: print hardware reservation stats\n\nThis also removes a lookup to check if the machine is managed by the shepherd. We can skip that since already know that the hardware reservation has a device attached.\n\nChange-Id: Ic732a8152316cf5ba83e980451fd2a4b0f778d99\nReviewed-on: https://review.monogon.dev/c/monogon/+/1554\nReviewed-by: Serge Bazanski \u003cserge@monogon.tech\u003e\nTested-by: Jenkins CI\n" }, { "commit": "b44a5076cec5a8863ae9ff26fd641d6b62911aac", "tree": "97a2bde34377aa03feb368567ab851c19bda4ac3", "parents": [ "ae7e3ed68433bc63fa038b8aa6499dff7ee12378" ], "author": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Tue Apr 18 13:14:33 2023 +0200" }, "committer": { "name": "Lorenz Brun", "email": "lorenz@monogon.tech", "time": "Tue Apr 18 12:04:59 2023 +0000" }, "message": "c/agent: do not stop retrying heartbeats\n\nThere is nothing better to do other than infinitely retrying.\n\nChange-Id: Ifda7e8d95120801f95f6fcf71124597cff086625\nReviewed-on: https://review.monogon.dev/c/monogon/+/1558\nReviewed-by: Tim Windelschmidt \u003ctim@monogon.tech\u003e\nTested-by: Jenkins CI\n" } ], "next": "ae7e3ed68433bc63fa038b8aa6499dff7ee12378" }