metropolis/proto/common/common.proto

// Copyright 2020 The Monogon Project Authors.
//
// SPDX-License-Identifier: Apache-2.0
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

syntax = "proto3";
package metropolis.proto.common;
option go_package = "source.monogon.dev/metropolis/proto/common";

import "google/protobuf/timestamp.proto";

// NodeRoles are the possible roles that a Metropolis Node should run within the
// cluster. These are configured by the cluster and can be retrieved through the
// Curator.
//
// Fields contained within each individual are publicly available, so while they
// can be used to carry required data to start up services for a given role,
// this must not be confidential/private data.
message NodeRoles {
    message KubernetesController {
    }
    message KubernetesWorker {
    }
    message ConsensusMember {
        // ca_certificate is a DER-encoded x509 certificate of the etcd
        // cluster's CA. The member must use this certificate to verify the
        // identity of the cluster it's connecting to.
        bytes ca_certificate = 1;
        // pper_certificate is a DER-encoded x509 certificate of this node's
        // etcd peer listener. The member must serve member traffic using this
        // certificate. The private key corresponding to this certificate is
        // the same as the node's primary private keypair.
        bytes peer_certificate = 2;
        // initial_crl is a certificate revocation list that the etcd member
        // should be started with. After startup, the member will maintain its
        // own CRL by updating it from its primary storage location, and etcd
        // value.
        //
        // TODO(q3k): don't pass this here, instead pass this over an etcd
        // watcher and curator.Watch.
        bytes initial_crl = 3;
        message Peer {
            string Name = 1;
            string URL = 2;
        }
        repeated Peer peers = 4;
    }
    KubernetesWorker kubernetes_worker = 1;
    ConsensusMember consensus_member = 2;
    KubernetesController kubernetes_controller = 3;
}

// NodeState is the state of a Metropolis node from the point of view of the
// cluster it is a part of (or intending to be a part of).
enum NodeState {
    NODE_STATE_INVALID = 0;

    // NEW: the node has established a first contact with the cluster and
    // intends to register into it. The node's identity has not been verified
    // and no hardware attestation of the new node was performed.
    // The node has generated a CUK/NUK and set up storage encrypted with the
    // combination of both keys.
    // The node has generated a private/public keypair, and that keypair has
    // been used to contact the already running Cluster.
    NODE_STATE_NEW = 1;
    // STANDBY: the node has successfully passed identity and hardware
    // attestation checks as defined by the cluster policy. The node still isn't
    // part of the cluster, as it itself might perform checks against the
    // running Cluster.
    NODE_STATE_STANDBY = 2;
    // UP: the node has passed all preconditions for STANDBY and has also
    // performed a commit into the cluster by exchanging its CUK for a
    // certificate issued by the cluster.
    // The node is now ready to serve, and its certificate can be used to
    // authenticate its identity cryptographically.
    NODE_STATE_UP = 3;
    // DISOWNED: the node has been rejected or decommissioned by the cluster.
    // Any further contact from the node to the cluster will be rejected.
    NODE_STATE_DISOWNED = 4;
};

// ClusterState is the state of the cluster from the point of view of a node.
// Different subsystems can watch this state and depend on it for behaviour
// (eg. start serving when HOME, maybe self-fence on SPLIT, etc.).
enum ClusterState {
    CLUSTER_STATE_INVALID = 0;

    // UNKNOWN: the node has not yet determined the existence of a cluster it
    // should join or start. This is a transient, initial state that should only
    // manifest during boot.
    CLUSTER_STATE_UNKNOWN = 1;
    // FOREIGN: the node is attempting to register into an already existing
    // cluster with which it managed to make preliminary contact, but which the
    // cluster has not yet fully productionized (eg. the node is still being
    // hardware attested, or the operator needs to confirm the
    // registration of this node).
    CLUSTER_STATE_FOREIGN = 2;
    // TRUSTED: the node is attempting to register into an already registered
    // cluster, and has been trusted by it. The node is now attempting to fully
    // commit to registering into the cluster.
    CLUSTER_STATE_TRUSTED = 3;
    // HOME: the node is part of this cluster. This is the bulk of time in which
    // this node will spend its time.
    CLUSTER_STATE_HOME = 4;
    // DISOWNING: the node has been disowned (ie., removed) by the cluster, and
    // that it will not be ever part of any cluster again, and  that it will be
    // decommissioned by the operator.
    CLUSTER_STATE_DISOWNING = 5;
    // SPLIT:the node would usually be Home in a cluster, but has been split
    // from the consensus of the cluster. This can happen for nodes running
    // consensus when consensus is lost (eg. when there is no quorum or this
    // node has been netsplit), and for other nodes if they have lost network
    // connectivity to the consensus nodes. Clients should make their own
    // decision what action to perform in this state, depending on the level of
    // consistency required and whether it makes sense for the node to fence its
    // services off.
    CLUSTER_STATE_SPLIT = 6;
}

// NodeStatus contains all fields self-reported by nodes. This data is
// inherently less trusted than other data available about a node, as it can be
// updated to any value by each node individually, including compromised nodes.
message NodeStatus {
    // external_address is the IP address that the node expects management,
    // cluster and user traffic to arrive at (ie. the address on which it is
    // listening for gRPC, and role-specific services like etcd and
    // Kubernetes).
    string external_address = 1;
    // running_curator contains information about the curator service running
    // on this node, or is nil if the service is not running.
    message RunningCurator {
        // port is the TCP port on which the curator is listening.
        int32 port = 1;
    }
    RunningCurator running_curator = 3;
    // timestamp is an epoch number associated with the last status update.
    // It's set with a nanosecond granularity.
    google.protobuf.Timestamp timestamp = 2;
}

// The Cluster Directory is information about the network addressing of nodes
// in a cluster. It is a serialized snapshot of some of the state within the
// etcd cluster, and can be used by external processes (like a node Registering
// into the cluster) to know how to reach this cluster over the network. It can
// be thought of as a phonebook, or a static name/address configuration that
// could live in /etc/hosts.
//
// The directory explicitly doesn't carry any information about the cluster's
// identity or security - these should be configured and checked by higher
// level configuration and processes. The directory can be stored and
// transmitted in cleartext and without an integrity checks (like saved to the
// EFI system partition across reboots) and any malicious change to it will
// cause no more than a denial of service against the consumer of this
// directory. This is because all nodes contacted must present a valid cluster
// identity/certificate before they are trusted by the consumers of this
// directory.
message ClusterDirectory {
    message Node {
        bytes public_key = 1;
        message Address {
            string host = 1;
        };
        repeated Address addresses = 2;
    };
    repeated Node nodes = 1;
}


// NodeClusterNetworking carries information about the cluster networking (ie.
// WireGuard mesh) connectivity of a node.
message NodeClusterNetworking {
    message Prefix {
        string cidr = 1;
    }
    // wireguard_pubkey is the base64-encoded public key used by the node.
    string wireguard_pubkey = 1;
    // prefixes are networking routes exported by the node to the cluster networking
    // mesh, and are programmed by other nodes into their wireguard peer config.
    repeated Prefix prefixes = 2;
}

// Severity level corresponding to //metropolis/pkg/logtree.Severity.
enum LeveledLogSeverity {
    INVALID = 0;
    INFO = 1;
    WARNING = 2;
    ERROR = 3;
    FATAL = 4;
}

// Filter set when requesting logs for a given DN. This message is equivalent to
// the following GADT enum:
// data LogFilter = WithChildren
//                | OnlyRaw
//                | OnlyLeveled
//                | LeveledWithMinimumSeverity(Severity)
//
// Multiple LogFilters can be chained/combined when requesting logs, as long as
// they do not conflict.
message LogFilter {
    // Entries will be returned not only for the given DN, but all child DNs as
    // well. For instance, if the requested DN is foo, entries logged to foo,
    // foo.bar and foo.bar.baz will all be returned.
    message WithChildren {
    }
    // Only raw logging entries will be returned. Conflicts with OnlyLeveled
    // filters.
    message OnlyRaw {
    }
    // Only leveled logging entries will be returned. Conflicts with OnlyRaw
    // filters.
    message OnlyLeveled {
    }
    // If leveled logs are returned, all entries at severity lower than `minimum`
    // will be discarded.
    message LeveledWithMinimumSeverity {
        LeveledLogSeverity minimum = 1;
    }
    oneof filter {
        WithChildren with_children = 1;
        OnlyRaw only_raw = 3;
        OnlyLeveled only_leveled = 4;
        LeveledWithMinimumSeverity leveled_with_minimum_severity = 5;
    }
}

// LogEntry corresponding to logtree.LogEntry in //metropolis/pkg/logtree.
message LogEntry {
    // A leveled log entry emitted from a compatible system, eg. Metorpolis code
    // or a klog-parsed line.
    message Leveled {
        repeated string lines = 1;
        google.protobuf.Timestamp timestamp = 2;
        LeveledLogSeverity severity = 3;
        // Source of the error, expressed as file:line.
        string location = 4;
    }
    // Raw log entry, captured from an external system without parting. Might
    // contain some timestamp/level/origin information embedded in data. Data
    // contained within should be treated as unsanitized external data.
    message Raw {
        string data = 1;
        // Original length of line, set if data was truncated.
        int64 original_length = 2;
    }

    // Origin DN.
    string dn = 1;
    oneof kind {
        Leveled leveled = 2;
        Raw raw = 3;
    }
}

// ClusterConfiguration contains the entirety of the user-configurable behaviour
// of the cluster that is scoped to the entirety of the cluster (vs. per-node
// configuration, which is kept alongside Node).
//
// It can be set initially when a cluster is being bootstrapped (in
// NodeParamaters.ClusterBootstrap), and then can be partially managed by
// management calls to the curator.
message ClusterConfiguration {
    // tpm_mode defines the TPM usage policy for cluster nodes. When nodes
    // register into the cluster (and then join into it) they will report their
    // TPM availability, and in return the cluster will respond whether they
    // should use that TPM or not.
    //
    // If a node is instructed to use its TPM, it will use it to encrypt its part
    // of the disk encryption key when saving it to the EFI system partition.
    // That means that the node will only be able to re-join the cluster if its
    // secure boot configuration doesn't change.
    //
    // If a node is instructed to not use its TPM, it will save its part of the
    // disk encryption key straight onto the EFI system partition without any
    // further encryption. It still needs to connect to a working cluster to
    // retrieve the other part of the key. This means that the configuration is
    // secure vs. offline disk decryption attempts, but not secure if an
    // attacker can connect to a cluster and impersonate the node in order to
    // retrieve the other part of its key.
    enum TPMMode {
        TPM_MODE_INVALID = 0;
        // Nodes need to join with a TPM2.0 device and will be instructed to
        // use it.
        TPM_MODE_REQUIRED = 1;
        // Nodes will be allowed to join regardless of TPM2.0 presence, and will
        // be instructed to use it if they have one.
        TPM_MODE_BEST_EFFORT = 2;
        // Regardless of the node's local TPM presence it will be instructed to
        // not use it.
        TPM_MODE_DISABLED = 3;
    }
    TPMMode tpm_mode = 1;
}

// NodeTPMUsage describes whether a node has a TPM2.0 and if it is/should be
// actively used to seal secrets before saving them to its EFI system partition.
enum NodeTPMUsage {
    NODE_TPM_INVALID = 0;
    // This node has no TPM 2.0.
    NODE_TPM_NOT_PRESENT = 1;
    // This node has a TPM 2.0 but the cluster configuration mandates not using
    // it.
    NODE_TPM_PRESENT_BUT_UNUSED = 2;
    // This node has a TPM 2.0 and it is being actively used.
    NODE_TPM_PRESENT_AND_USED = 3;
}