cloud/agent/api/hwreport.proto

syntax = "proto3";
package cloud.agent.api;
option go_package = "source.monogon.dev/cloud/agent/api";

message BlockDevice {
  // Name of the vendor of the block device
  string vendor = 1;
  // Device model of the block device
  string device_model = 2;
  // Serial number of the block device
  string serial_number = 3;
  // World Wide Name of the block device (not always available)
  bytes wwn = 4;
  // Set if this is a rotational disk
  bool rotational = 5;

  // Usable capacity in bytes
  int64 capacity_bytes = 6;

  // Logical and physical block size in bytes. Note that on many modern
  // enterprise drives these can be changed.
  int32 logical_block_size_bytes = 7;
  int32 physical_block_size_bytes = 8;

  enum Protocol {
    UNKNOWN = 0;
    SCSI = 1;
    ATA = 2;
    NVME = 3;
    MMC = 4;
  }
  Protocol protocol = 9;

  // Set if the block device has reasons to believe that it will fail soon.
  // This is entirely controlled by firmware, its accuracy is as good as
  // the vendor has made it.
  bool critical_warning = 10;

  // Number of unrecoverable media read errors.
  // On SATA disks this is technically equivalent to Raw_Read_Error_Rate, but
  // only a tiny minority of devices populate that sanely. So instead this is
  // defined as the sum of S.M.A.R.T. attributes 5, 197 and 198.
  optional int64 media_errors = 11;

  // Fraction of spare space still available to replace bad blocks.
  // If this reaches zero, the disk generally dies.
  optional float available_spare_ratio = 12;

  // Fraction of the estimated life of the device used up.
  // Only considers flash wear, not runtime or similar.
  // Reported by firmware, as accurate as the vendor has made it.
  optional float usage_ratio = 13;
}

message NetworkInterface {
  // Contains the EUI-48 MAC address of the interface.
  bytes mac = 1;
  // Linux kernel driver which is bound to the interface.
  string driver = 2;

  // List of supported speeds in bytes per second.
  repeated int64 supported_speed_bytes = 3;

  // Does the interface have an active link.
  bool link_up = 4;
  // Currently-negotiated speed in bytes per second. Unstable on marginal
  // links.
  int64 current_speed_bytes = 5;
}

message CPU {
  message X86_64 {
    // Family of the CPU, including extended family.
    // For example 6 for Intel's "big" cores.
    int32 family = 1;
    // Model of the CPU, including extended model.
    // For example 154 for ADL-S.
    int32 model = 2;
    // Stepping of the CPU, model-dependent value.
    int32 stepping = 3;
  }
  oneof architecture {
    X86_64 x86_64 = 1;
    // Information specific to other architectures can be added here.
  }
  // Number of hardware threads (including SMT threads, harts, ...) exposed to
  // to the operating system.
  int32 hardware_threads = 9;
  // Number of cores of the CPU. This does not include SMT threads or other
  // equivalent mechanisms to increase logical core count.
  int32 cores = 8;
  // Name of the vendor of the CPU
  string vendor = 10;
  // Name of the model of the CPU
  string model = 11;
}

message Node {
  // Manufacturer of the system, taken from DMI.
  string manufacturer = 1;
  // Product name, taken from DMI.
  string product = 2;
  // Serial number of the system, taken from DMI.
  string serial_number = 3;

  // Amount of physical memory installed, in bytes. Determined using DMI (if
  // available and not marked unusable) or memory blocks in sysfs
  // (/sys/devices/system/memory/...). This is not taken from meminfo as that
  // value is relatively unstable and hard to match to.
  // Assuming a non-terrible firmware implementation this value is expected to
  // be stable.
  int64 memory_installed_bytes = 8;

  // Ratio of claimed installed memory which is available to the Linux
  // kernel (taken from sysinfo's totalmem). Note that this value is unstable
  // across kernel versions and even firmware configuration settings and should
  // only be used to detect gross mismatches. 1 means all of the claimed
  // installed memory is available, 0 means none.
  float memory_usable_ratio = 9;

  repeated CPU cpu = 10;
  repeated BlockDevice block_device = 11;
  repeated NetworkInterface network_interface = 12;
}